$20.56 – Sold Out
| /
Fold down for convenient and compact storage or extend for added reach with Attwood's new line of Fold-N-Stow Fishing Net. A flip of the handle...
View full product details$17.53
| /
Use these molded rubber connectors for quick, convenient connections between an electric trolling motor and the power source. 6" long, 2-wire harness with butt connectors....
View full product details$19.19
| /
Use these molded rubber connectors for quick, convenient connections between an electric trolling motor and the power source. 6" long, 2-wire harness with butt connectors....
View full product details$18.10
| /
Safe and easy quick disconnect system. For use where a plug and socket cannot be used. Heavy duty 10 gauge connector. Replaces battery clips.
View full product details$18.26
| /
The funnel's fine mesh screen filters out most foreign matter. The unique design virtually eliminates splashing. Constructed of lightweight floating polyethylene plastic.
View full product details$12.72 – Sold Out
| /
The funnel's fine mesh screen filters out most foreign matter. The unique design virtually eliminates splashing. Constructed of lightweight floating polyethylene plastic.
View full product details$26.78
| /
Heavy Duty adjustable rod holders are designed for use with casting and spinning rod holders. The durable, deep tooth gear lock securely holds rod holder...
View full product details$14.63
| /
For use with Bi-Axis mount, Attwood standard side mounts, and other leading rod holder mounts. Complete with all necessary hardware to mount to rail. Designed...
View full product details$32.44
| /
Twist/bayonet lock design secures lens and cover to base. Includes a 9-Watt (#906) wedge base lamp and 7" wire leads for connection to 12 VDC...
View full product details$32.44
| /
Twist/bayonet lock design secures lens and cover to base. Includes a 9-Watt (#906) wedge base lamp and 7" wire leads for connection to 12 VDC...
View full product details$35.17
| /
Twist/bayonet lock design secures lens and cover to base. Includes a 9-Watt (#906) wedge base lamp and 7" wire leads for connection to 12 VDC...
View full product details$32.34 – Sold Out
| /
Ideal for use where the light must be elevated for visibility above rails and carpeting. Notch in rear of mounting base provides passage for wire...
View full product details$38.33
| /
One-mile, 225° red/green light visibility for boats up to 39.4 ft. (12 meters). Available in straight or angled pole. Includes 8-watt wedge base lamp. The...
View full product details$51.40 – Sold Out
| /
Attwood offers a variety of durable stowaway combination pole-mounted sidelights for bow mounting. Each features an anodized aluminum pole that raises the light head for...
View full product details$45.08 – Sold Out
| /
One-mile, 225° bi-color (red/green) light visibility for boats up to 39.4" (12 meters). Available in straight or angled pole. Includes 9-watt wedge-base lamp. USCG certified.
View full product details$49.59
| /
Attwood offers a variety of durable stowaway combination pole-mounted sidelights for bow mounting. Each features an anodized aluminum pole that raises the light head for...
View full product details$76.27 – Sold Out
| /
The Task Light features a durable rubber "push-on" switch and a micro bulb. The Task Light output is 10 times brighter than competitive models, for...
View full product details$24.22
| /
The Attwood All-Around Frosted Globe Light provides a two-mile, 360° illumination for boats up to 65.6' (20 meters). Includes 9-watt wedge-base bulb. Features two-pin standard...
View full product details$49.37 – Sold Out
| /
The Attwood All-Around Frosted Globe Light provides a two-mile, 360° illumination for boats up to 65.6' (20 meters). Includes 9-watt wedge-base bulb. Comes with 2-Pin...
View full product details$29.15
| /
Frosted Globe All-Round light comes with 2-Pin locking collar pole that measures to 24 inches. The lens has a clean, translucent look that provides a...
View full product details$36.17
| /
Frosted Globe All-Round light comes with 2-Pin locking collar pole that measures to 30 inches. The lens has a clean, translucent look that provides a...
View full product details| /
$41.71 – Sold Out
| /
Frosted Globe All-Round light comes with 2-Pin locking collar pole that measures to 36 inches. The lens has a clean, translucent look that provides a...
View full product details$41.68
| /
Frosted Globe All-Round light comes with 2-Pin locking collar pole that measures to 42 inches. The lens has a clean, translucent look that provides a...
View full product details$46.17
| /
Frosted Globe All-Round light comes with 2-Pin locking collar pole that measures to 48 inches. The lens has a clean, translucent look that provides a...
View full product details$34.99 – Sold Out
| /
Fixed base All-round light for use on pontoons, hard tops, and radar arches. 8" tall. Attwood's LED design draws only 1.8 watts at 12VDC -...
View full product details$54.89
| /
Attwood's Anti-Glare lights focus light at the horizon and above - not in the driver's eyes. The bottom aperture reduces glare at 7.5° below horizontal....
View full product details$82.53
| /
Since all-round lights must be at least "One Meter" above the sidelights, some boats require a longer pole light that is difficult to store.Attwood's Folding-Pole...
View full product details$53.58
| /
Two-mile, 360° visibility for use on boats up to 39.4 feet (12 meter). Bases install with two required #10 fasteners. Each light includes 9-watt wedge...
View full product details$36.54
| /
Attwood Deck-Mounted All-Round Lights features a 7" leads for connection to 12 VDC power supply. Twist/bayonet lock secures lens and cover to base and provides...
View full product details$14.53 – Sold Out
| /
These check tees replace additional connections for RV and marine hookups, providing a combination check valve and tee that allows water to flow in from...
View full product details$15.36 – Sold Out
| /
These check tees replace additional connections for RV and marine hookups, providing a combination check valve and tee that allows water to flow in from...
View full product details$14.23 – Sold Out
| /
For lighting passageways and wherever low level lighting is needed. Transparent polycarbonate plastic lens can be removed easily to change automotive-type bulb. Easy-to-install surface mount....
View full product details$28.90 – Sold Out
| /
304 stainless steel with a plastic body and watertight lamp socket. The Round transom light body is translucent so it shines on both sides of...
View full product details$33.57 – Sold Out
| /
One-mile combination sidelight for powerboats under 39.4 feet (12 meters). Meets ABYC Standard A-16. 12-volt D.C., 6 CP (#90) lamp included. Pre-drilled with two counter-sunk...
View full product details$207.11 – Sold Out
| /
At less than 1 inch thick the lights are designed to be mounted directly to the surface of the hull. With only a small hole...
View full product details$88.62
| /
Creating 135 degrees of light at 3NM of Visibility, Attwood's proprietary optics design focuses the light aft, keeping the operator in a "shadow." Easy to...
View full product details$46.54 – Sold Out
| /
One-mile sidelight for powerboats under 39.4 feet (12 meters). Meets ABYC Standard A-16. 12-volt D.C., 6 CP (#90) lamp included. NMMA "As Approved List". No....
View full product details$58.07 – Sold Out
| /
Swivel cover on base protects the base socket when light is stowed away. Base extends just 3" below deck. 4"-long x 1-5/8"-wide x 1-3/8"-dia. Provides...
View full product details$66.18 – Sold Out
| /
Swivel cover on base protects the base socket when light is stowed away. Base extends just 3" below deck. 4"-long x 1-5/8"-wide x 1-3/8"-dia. Provides...
View full product details$73.42
| /
Swivel cover on base protects the socket when light is stowed. Base extends just 3" below deck.4" L x 1-5/8" W x 1-3/8"-dia.Provides 2-mile 360°...
View full product details$29.91
| /
Use these connectors for quick, convenient connections between an electric trolling motor and the power source. 6" long wire harnesses with butt connectors. Plate dimension:...
View full product details$15.29 – Sold Out
| /
Female receptacle has weather cover and small face plate for flat surface mount and two holes for #8 fasteners. For use with trolling motors. Refer...
View full product details$15.81
| /
Female receptacle has weather cover and small face plate for flat surface mount and two holes for #8 fasteners. For use with trolling motors. Refer...
View full product details$26.64
| /
Motorguide's trolling motors and accessories are made with quality parts and materials for optimal performance and reliability. Trolling motor power receptacle works with 2-prong 50...
View full product details$51.98 – Sold Out
| /
Humminbird sonar adapter for tour series with 7 pin connection. Made specifically for use with Humminbird equipment. Constructed with quality parts/materials for optimal performance and...
View full product details$8.75
| /
Replacement Strap Straps are woven polypropylene with "firm grip" buckles and are completely resistant to battery acid. Hold-down straps resist 350 pounds of force, nearly...
View full product details$13.15 – Sold Out
| /
Meets ABYC standard E-10 and U.S. Coast Guard Specification Number 183.420 as an OEM-installed battery hold-down system. Polypropylene construction for total acid resistance. Hold-down straps...
View full product details$18.07 – Sold Out
| /
New larger capacity! Vented black battery box for Series 27 batteries. (10-1/2" maximum height). Battery boxes meet ABYC Standard E-10 and U.S. Coast Guard Specification...
View full product detailsSign up to get the latest on sales, new releases and more…